|
|
| | About our site | Use & Disclaimer | Shop for faucets | |
|
1) If you have a sink with three holes and would like to buy a new faucet that only has one handle, what can you do to cover the other holes?
You can simply purchase an escutcheon
plate that will cover the remaining holes, or you can complement you
faucet with a soap dispenser, hot water dispenser or filtered water
dispenser. The
standard spout height of a faucet is approximately 3 to 7 inches. Some
customers require more spout height so the manufacturers have made
faucets with high spouts. These higher spouts range from 8 to 12 inches.
A gooseneck spout is simply a high spout style that resembles an upside
down “J.”
Moen makes the most well known filter
faucet, called the PureTouch. It is available in several finishes and is
a perfect choice for homeowners who don't have room under the sink for a
standard filtration system.
Most do since standard-size sink
openings and faucet dimensions are used throughout the plumbing
industry. However, since there are a few exceptions, it is a good idea
to check sizes first. The one area you might want to verify is the spout
length just to make sure the spout hits inside the sink basin and is not
too long. Most of the time, this won't be a problem either, but if you
have an exceptionally long faucet and/or a short sinks from front to
back, it could come into play in your buying decision. Some say that
having a single handle faucet gives you greater flexibility when
preparing food because you are able to turn the faucet on and off with
just one hand. Other than that, there is no benefit to one over the
other. Copyright Kitchen Faucet Review.com. All rights Reserved world wide. All trademarks and service marks are property of their respective owners. |
|
| Resources | list of our pages | house and home design resource |
Have
questions about kitchen faucets? We have listed some of the most common
questions and the answers to those questions on this page.